|500g F1 Class Calibration Weight Ref: 7514F1P|
INSIST on UKAS Calibration
The validity of your work is only as good as the weakest link in your method or procedure. This is why it is imperative that you regularly check the equipment that you depend upon and the balance is one such piece of equipment that should be monitored.
Why Use our UKAS Laboratory?
Is a non UKAS accredited service the same?
No. These labs have not been independently audited on their technical competence to perform the calibration and the traceability of their reference standards and equipment used has not been verified. Being ISO9001 accredited makes no difference since this only demonstrates an organisation has been audited on general management procedures and not the technical services they offer.
My service provider use UKAS traceable weights
Calibrations performed using UKAS traceable weights are not acceptable UKAS calibrations and deliver little additional
confidence in the calibration as a whole.
If you are not sure you are receiving a UKAS calibration, then ask the service provider for their laboratory number and check their registration here.
INSIST on UKAS
Advice on choosing calibration and test weight
If you would like advise on choosing calibration and test weights contact us and request our “Weight Guide”, which will then be sent you by email.
Don’t risk it - Insist on UKAS